Cascom SE

Induction Casting Machine

Product
Instruction manual
Product
Instruction manual
■ The melting states of Co Cr Alloy
■ Excellent castability
 This new induction heating unit enables to translating to porosity-free dence casting,
 because melting alloy is not by gas flame and never absorbs any gas. Chamber
 inverting casting method has no possibility of involving oxidation film. In addition,
 the pressure 0.45MPa by vacuum and pressure is sufficiently powerful compared to
  centrifugal casting 0.1MPa. Also,the maintaining pressure prevents shrinkage cavity
  and enables to create any intricate casting results.

■ Various casting
 Available at casting various cases such as Inlay, Crown, Implant framework and Denture.
  Usable alloy for dental use is Precious~ Non-Precious except Titanium alloy.

■ Operation panel
  The buttons are placed for the flow of casting.
Model Cascom SE
Power Requirement AC220-240V ± 10% 50/60Hz
Power Consumption 3.5kVA Max.
Overall Dimensions 560W × 490H × 490Dmm not including a projection.
Weight 42kg
Environment for setup Temperature 0~40 ℃ Humidity 30~90 % (not condensing) Altitude Max. 2000m
Alloy Melting Method High Frequency Induction Heating
Cooling System Optional Chiller or Direct Connect Water
Casting Method Chamber Inverting Vacuum and Pressure Casting
Operation Panel Intuitive Panel
Compressed Air Pressure 0.5~1.0MPa
Argon Gas Pressure 0.5~1.0MPa
Pressurized Atmosphere Air or Argon Gas Atmosphere
Pressurized Pressure 0.35MPa, Fixed
Usable Casting Ring Standard Ring: Max. dia.90 × H70mm Min.dia.34 × H50mm
Type of Crucibles Ceramic Crucible Life 15~30 times Carbon Crucible Life 10~20 times ※ Crucible life depends on use conditions.
Maximum Temperature 1650 ℃
Alloy Melting Quantity Cobalt Chrome: 10~60g Gold: 10~60g less than 5cm3 when use carbon crucible S. 10~120g less than 10cm3 when use carbon crucible L.
High Frequency Conduction Time Max. 5min.
Melting Time Melting within 3 minutes for 60g of cobalt chrome.

Uses: option DRY VACUUM PUMP DDP-40

Model DDP-40
Power requirement TYPE:AC120V 60Hz Max.300VA TYPE:AC220-230V 50/60Hz Max.322VA
Overall dimensions・weight 161(W)×189(H)×279(D)mm. 7.7kg 165(W)×189(H)×279(D)mm. 7.8kg
Max. air pressure 1.2kPa
Exhaust speed 40 L/min.
Ambient temp. 7~40℃
Accessory Pump hose φ6×φ12 2m
Continuous running time Less than 15min.
Operation cease time 20min. Over

Product inquiry

Related products