SINGLE JET
Features
Can be used for themoplastic resin as well as heat curing resin
Wide range of non-metallic clasps, such as Acrytone and Biotone
Optional pressure booster for stable injection
Safety design, not operating unless the door is closed
Wide range of non-metallic clasps, such as Acrytone and Biotone
Optional pressure booster for stable injection
Safety design, not operating unless the door is closed
ALUMINIUM CASE+CAP
Usage:Dissolution of resin
■ Inserted into the cylinder for dissolution of resin
Packaging：100set
JET Cylinder+Press Plate (For directly)
Usage: Dissolution of thermoplastic resin
■ Be used for melting of resin and injection molding process.
■ Thin and long shape make melting process more efficient.
Packaging：1set
JET Cylinder+Press Plate (For Aluminum case)
Usage: Dissolution of thermoplastic resin
■ For aluminum case (with cap).
Packaging：1set
DREAM-FLASK
Usage:Pressure resistant flask for resin base injection
■ Internal structure designed to save plaster.
■ Two-piece structure (upper part and lower part) allows easy operation for flasking.
■ Internal structure designed to save plaster.
■ Two-piece structure (upper part and lower part) allows easy operation for flasking.
External dimension:
W126.5mm×D68.5mm×H100mm
W126.5mm×D68.5mm×H100mm
Type:M, L
(same external dimension)
(same external dimension)
Packaging：1set
specification
| Model | SINGLE JET |
| Environment for use | Indoor use、Temperature 5-40 ° C、 Humidity 10-95% RH(no condensation)、 Altitude 2000m or less |
| Power Requirement | 100-240V±10% 50/60Hz |
| Power Consumption | 7VA |
| Injection time | 1 sec to 9 mins 59 secs、10.0 mins to 99.0 mins、continuous |
| Overall Dimensions | 275(W)×602(H)×280(D) mm |
| Weight | 30 kg |
| Accessories | 8mm air hose for piping (5m)、Packing (small)×1、Packing (large)×1、 Sleeve adapter×1、Resin spacer×2、Power Cord (2 types)、 Instruction manual×1 |
