SINGLE JET

Features

Can be used for themoplastic resin as well as heat curing resin
Wide range of non-metallic clasps, such as Acrytone and Biotone
Optional pressure booster for stable injection
Safety design, not operating unless the door is closed

ALUMINIUM CASE+CAP

Usage:Dissolution of resin

■ Inserted into the cylinder for dissolution of resin

Packaging:100set

JET Cylinder+Press Plate (For directly)

Usage: Dissolution of thermoplastic resin
■ Be used for melting of resin and injection molding process.
■ Thin and long shape make melting process more efficient.

Packaging:1set

JET Cylinder+Press Plate (For Aluminum case)

Usage: Dissolution of thermoplastic resin
■ For aluminum case (with cap).

Packaging:1set

DREAM-FLASK

Usage:Pressure resistant flask for resin base injection
■ Internal structure designed to save plaster.
■ Two-piece structure (upper part and lower part) allows easy operation for flasking.
External dimension:
W126.5mm×D68.5mm×H100mm
Type:M, L
(same external dimension)
Packaging:1set

specification

Model SINGLE JET
Environment for use Indoor use、Temperature 5-40 ° C、 Humidity 10-95% RH(no condensation)、 Altitude 2000m or less
Power Requirement 100-240V±10%  50/60Hz
Power Consumption 7VA
Injection time 1 sec to 9 mins 59 secs、10.0 mins to 99.0 mins、continuous
Overall Dimensions 275(W)×602(H)×280(D) mm
Weight 30 kg
Accessories 8mm air hose for piping (5m)、Packing (small)×1、Packing (large)×1、 Sleeve adapter×1、Resin spacer×2、Power Cord (2 types)、 Instruction manual×1

Uses: Resin furnace JET MELT 2

Model JET MELT 2
Power Requirement Single phase AC100V ±10% 50/60Hz
Power consumption 500VA
Overall dimension 200(W) x 170(H) x 250(D) mm
Weight 6.8kg
Number of melting slot 2
Setting temp. range 20~340℃ ( in 1℃)
Timer 10 sec.~99 min. 50 sec. ( in 10 sec.)
Environment for use Room Temperature 5~40℃ Humidity 10~95%RH no condensing Altitude: 2000 meter and under Indoor use Pollution Degree 2 Over voltage Category Ⅱ
Melt up to two resins at a time with our JET MELT

■ PID control system responds repidly to environmental temperature changes and
 disturbances which will reset the temperature.
■ Two melting pots make mass production possible.

Uses: Resin furnace JET MELT 6

Model JJET MELT 6
Power Requirement Single phase AC100V ±10% 50/60Hz
Power consumption 1000VA
Overall dimension 200(W) x 170(H) x 350(D) mm
Weight 10.4kg
Number of melting slot 6
Setting temp. range 20~340℃ ( in 1℃)
Timer 10 sec.~99 min. 50 sec. ( in 10 sec.)
Environment for use Room Temperature 5~40℃ Humidity 10~95%RH no condensing Altitude: 2000 meter and under Indoor use Pollution Degree 2 Over voltage Category Ⅱ
Melt up to six resins at a time with our JET MELT

■ PID control system responds repidly to environmental temperature changes and
 disturbances which will reset the temperature.
■ Six melting pots make mass production possible.

Product inquiry

Related products