DT-200D

Computerized Occlusion Rim Softening Equipment
Creating an Instant, Perfect and Clean Softening in Uniformity and Adequate Temperature !!

Product
Catalog
Occlusal Rim Softening  
Instant: DT-200 is designed with honeycomb-shaped heater which allows the dentist to soften a wax occlusion rim in approximately 10 seconds.
Uniformity: DT-200 enables application of even heat and softening to an optimal depth by the simple pressing of a wax rim on the honeycomb-shaped heater.
Adequate Temperature: Operator can adjust temp. form 248 to 356 F. No wax odor and smoke.
Perfect: The dentist is able to soften a wax occlusion rim to an optimal depth that prevents errors or failures from over biting by the patient when taking the bite registration. Clean : DT-200 features a wax disposal tray which allows the operator to collect and clean the melted wax easily. No melted wax odor diffuses into the air.

■ Instant / Complete softening within approx. 10 seconds
■ Uniformity / Softening to an optional depth in uniformity
■ Adequate Temp./ Free from the patient's unpleasantness and unease
■ Perfect / Patient's deep bite controlable
■ Clean / No wax smell and smoke
Model DT-200D
Meaasurement W160 x D220 x H135mm
Weight 1.6kg
Power Requirement AC100V±10% 50/60Hz
Power Consumption 300VA
Temperature Display Digital display in 3 digits
Temperature Set Range 120~180℃ up/down by 1℃ unit measure
Warm-up Time Approx. 2 min. 30 sec. from room temp. up to 180℃