Zircom Plus
Furnace for Zirconia which can sinter up to 80 single crowns.
■ Full mouse support with a larger furnace than Zilcom
■ The firing schedule of major companies' zirconia discs has been registered as standard.
■ A program with 20 steps that can be applied to any material
■ Programs can be backed up and edited using an SD card
■ The firing schedule of major companies' zirconia discs has been registered as standard.
■ A program with 20 steps that can be applied to any material
■ Programs can be backed up and edited using an SD card
Accurate temperature distribution
Firing Tray
Firing Tray Cover
Firing Beads
| Model | Zircom Plus |
| Power Requirement | 220-240V±10% 50/60Hz |
| Power Consumption | 3.5kVA |
| Inner Muffle Size | Φ125×90(H)mm Double stack of accessory’s firing tray |
| Overall Dimensions | 375(W)×725(H)×540(D) mm |
| Weight | 43kg |
| Temperature sensor | JIS R Thermocouple |
| Environment for use | Indoor use Room Temperature 10～40℃ Humidity 30～90%RH no condensing Altitude: 2000 meter and under Pollution Degree 2 Over voltage Category Ⅱ |
| Maximum Temperature | 1600℃ |
| Program Memory Capacity | 100 programs |
| Safety Function | Cooling Fan, Abnormal temperature monitoring circuit, 10 abnormal operation detection apparatuses |
| Accessories | Upper Firing Stand ：1pc Lower Firing Stand ：1pc Firing Tray ：2pcs Firing Tray Cover ：1pc Firing Tray Saucer ：1pc Firing Beads ：2bottles SD Card ：1pc Instruction Manual ：1booklet |
